Programmable Thermostatic Circulator Model PCC-7010

Precise Ramp Control for Crystallization and Synthesis Reactions

・Wide Temperature Control Range: -30 to 80℃
・High-Precision Temperature Control: ±0.03℃
・70 Years of Innovation and Expertise
・A Trusted Leader in the Japanese Market

Ideal for Crystallization: Featuring 0.01°C temperature setting increments, this unit supports gentle ramp programming and slow cooling at 0.1°C/min, ensuring optimal conditions for crystallization and recrystallization.
User-Friendly Interface: Features a 4.3-inch color LCD screen designed for maximum visibility and intuitive operation.
Flexible Programming: Store up to three 10-step program patterns. These can be linked to perform complex operations of up to 30 steps for enhanced process automation.
Enhanced Workflow Efficiency: Store up to four program patterns featuring Standby, SKIP, and END functions—ideal for streamlining repetitive experimental protocols.
Seamless Data Management: Includes a standard USB port for easy PC connectivity. Download our dedicated ESMon2026 software here to remotely monitor, process, and configure temperature trend data.
Precision Process Control: When using an optional external sensor for direct vessel temperature control, PID parameters can be fine-tuned to ensure optimal thermal stability for your specific application.

Clear Display, Intuitive Control Panel

Operation Patterns

User Program

Two types of program modes (Type-A and Type-B) are available to suit your application:
Type-A (3 patterns): Automatically stops operation upon program completion.
Type-B (4 patterns): Features a Standby Function that maintains the final set temperature after the program ends.
For repetitive experiments, Type-B offers enhanced efficiency. By using the SKIP/END function during Standby, you can reset the system to its initial settings while maintaining the current temperature. Once the new sample is set, simply press the key again to restart the program cycle.

Safety Alarms and External Circulation

Self-Diagnostic Function: The system features built-in self-diagnostics. If an abnormality is detected, it automatically stops control and alerts the user with an alarm.
External Circulation: Equipped with stop valve nozzles for seamless external circulation.
External Temperature Control: With an optional temperature sensor, the unit can directly control the temperature of external equipment.

Dedicated Software for Enhanced Efficiency

Remote Control and Data Analysis via PC Connectivity
By connecting to a PC, you can use our measurement and control software to remotely manage temperatures and process trend data.

Note: A communication cable is not included. Please provide a separate USB cable (Type-A male to Type-B male). ESMon2026 is available for download here.

Specifications

		Product name	Programmable Thermostatic Circulator
		Model	PCC-7010
		Cat. No.	286330
		Circulation method	Closed circulation system
		Temperature control	PID control, SSR output
		Temperature control range	－30 to 80℃
		Temperature control accuracy	±0.03℃ (RT20℃, 40℃ setting)
		Temperature sensor	Platinum resistancetTemperature sensor Pt100Ω
		Cooling capacity 1	0℃ : 680W (584kcal/h)
		Cooling capacity 2	－30℃：150W (129kcal/h)
		Cooling ramp	1.0 to 0.1℃/min (80→10℃, Water), 1.2 to 0.1℃/min (20→－20℃, Ethanol), 0.4 to 0.1℃/min (20→－30℃, Ethanol)
		External circulation capacity	Max. flow rate 5.2L/min, Max. lifting height 2.9m (Discharge pressure: 0.03MPa, Water)
		Recommended media	Tap water, Ethylene glycol, Ethanol
		Setting ・display	Membrane keypad input, Min. setting digit 0.01℃・digital display
		Program functions	1.Constant value operation (Normal Mode), 2.Auto-start, 3.Auto-stop (1min to 99hr 59min), 4.User Program A (3 patterns), User Program B (4 patterns), (1 pattern : Max. 10 segments, 1min to 99hr 59min / 1 segment)
		Safety features	Self-diagnostic functions (low water level, sensor error, SSR failure, overheat protection, heater burnout, cooling failure, power failure alarm, program ramp error), Earth leakage・overcurrent breaker, Overload relay
		External input・output	USB-B port, External temperature sensor terminal
		Heater	1kW (Stainless steel)
		Circulation pump	Jet Stirring (Jet Flow), Max. flow rate 10L/min, Max. lifting height 3ｍ
		Bath capacity	13L
		Bath materials	Stainless steel
		Bath dimensions (mm)	250W x 295D x 180H
		Bath effective dimensions (mm)	200W x 125D x 145H
		External circulation nozzle	Outlet: 10.5mm OD tubing port (Rc1/4, with stop valve), Inlet: 10.5mm OD tubing port (Rc1/4)
		Refrigerator・refrigerant	Air-cooled, output 650W・R407C
		Cooling method	Coling coil
		Cooling coils	Nickel-plated copper
		Ambient temperature range	5 to 35℃
		Power cord	Length : Approx. 2.5ｍ, OD : Approx. 13mm
		Power input	20A, 2.0kVA
		Supply voltage	100VAC 　50/60Hz
		Weight	Approx. 52kg
		Outer dimensions (mm)	360(385)W x 470(540)D x 855H
		Accessories	Rubber tubing: 9mm ID x Length 25cm (1 pc), Silicone tubing (for external circulation): 9mm ID x Length 2m (1pc), Tubing clamps: 4 pcs. Note: USB cable is not included. Please purchase USB cable (Type-A male to Type-B male) separately.

*Specifications are based on an ambient temperature of 20°C, using tap water, rated voltage at 50Hz, and under no-load conditions.
*Cooling capacity may vary by ±10% of the stated value.
*External circulation capacity may vary by ±10% of the stated value.
*Temperature Control Accuracy: Accuracy may vary depending on conditions such as specific heat, viscosity, ambient temperature, and set temperature. The ±0.03°C accuracy is guaranteed under specific conditions: 20°C ambient temp, 40°C liquid temp, rated voltage, 10L of water, with lid, and no-load.
*Fluid Selection for Low Temperatures: For settings below 10°C, please use a low-temperature heat transfer fluid. Ethanol is required for temperatures below -10°C, as Nybrine^® and Ethylene Glycol become too viscous to circulate.
*Dimensions: Values in parentheses ( ) include external protrusions.
*Power Plug: A power plug is not included with the unit.

Data

Heating・Cooling Curves

Options

Cooling hose set (Operating temperature range: -30 to 80°C)
Prevents condensation during cooling water circulation, minimizing loss of cooling capacity.

Product name	Cooling hose set
Cat. No.	112690	112700	174420	233900
Pressure	0.1MPa			0.5MPa
Materials	Chloroprene rubber			Silicone
Operating temperature range	-30 to 80℃
Internal diameter	9mm
Length	1m	2m	5m	5m

External Temperature Sensor
Enables precise bath temperature control based on the real-time temperature of the circulation target.
Model : STP-200
Cat. No. : 113620

Clamp Set
Use this set to secure flasks or other vessels when immersing them in the bath.
Specification: Rc3/8 Tapered internal thread
Cat. No.: 164500

Go to Product line-up

Product line-up