Rotary evaporator N-4100 series

HOME > Rotary evaporator N-4100 series

Model N-4100・N-4100H・N-4100W

• Medium Size Rotary Evaporator

• A 20L sample flask is provided as standard

• Space-saving design suitable for laboratory use

N-4100 Standard model                                     N-4100W with two receiving flasks

 

♦ N-4100 has a footprint of 1060W x 550D (mm) and comes equipped with a 20L sample flask as standard. A 10L sample flask (optional) is available for smaller sample volumes.

♦ 40L heating bath with a wide temperature range (RT+10℃ to 180℃). Water/oil bath allows for the concentration of high-boiling point substances.

♦ The vacuum controller has pre-registered programs for 55 types of solvents, including those specified by environmental standards. Solvent recovery can be efficiently performed by selecting the solvent and appropriately controlling the vacuum.

♦By connecting the N-4100 to the diaphragm vacuum pump N950 (sold separately) using the included power cord, you can control the pump according to the operating conditions of the N-4100.

 

• Improved operability and safety features

♦ LCD screen

◊ The vacuum controller has been redesigned and the screen is now 4.3 inches, making it even easier to read.

◊ RPM and temperature values are now also displayed digitally on the LCD.

 

♦ USB port for data transfer

Parameters such as bath temperature, flask rotation speed, vacuum level, and vapor temperature can be retrieved via the micro USB port.

The dedicated software is available for download on our website.

♦ Safety cover

A safety cover is standard equipment to prevent hands or clothing from getting caught during rotation.

♦ Teflon® seal

The Teflon® seal allows for high vacuum operation (below 2.6hPa). Compared to Viton seals, it offers a longer lifespan, reducing the frequency of seal replacement and contributing to cost savings.

♦ Designed for improved ease of use, with an easy-to-attach and detach sample flask 

The combination of the flask base and the one-touch clamp allows for easy attachment and detachment of the sample flask. The bath height is conveniently set at 800mm for better operability. Changing to the optional 10L sample flask can also be done easily. 

♦ Double receiving flasks (N-4100W)

By equipping two receiving flasks, it is possible to discharge the distillate from the receiving flasks without stopping the equipment during concentration. Since the vacuum conditions remain stable, continuous concentration can be performed in a stable state.

♦ Dedicated stand

The unit comes with a dedicated stand, making handling and operation easier, and provides storage for the vacuum pump and consumables. It also has an earthquake-resistant structure that can be fixed to the floor with anchor bolts. N-4100H is available for those who do not need a stand.

 

♦ Specifications

Product name

Rotary Evaporator (20L) 
Model N-4100 N-4100W  N-4100H 
Cat. No. 281208 281218  281650 
Stand Standard accessory – 
Rotation speed range 10 to 140rpm Stepless speed control
Evaporation capacity Max.4L/h (Water evaporation) 
Ultimate vacuum 2.6hPa (2Torr) or less 4.6hPa (3.5Torr) or less  2.6hPa (2Torr) or less 
Bath temperature control range RT+10 to 180°C(For water/oil) 
Bath temperature accuracy ±1°C(When using water and rotating the sample flask)
±3°C(When using oil and rotating the sample flask)
Temperature control PID control 
Temperature setting / display Digital setting (Membrane keypad input, minimum settdigit ing 1°C), LCD display (Bath temperature, vacuum, vapor temperature: optional) 
Rotation setting / display Speed control method, LCD
Vacuum control function Fixed value control (1 to 760 mmHg/1 to 1013hPa), Program control (Pre-set internally for each representative solvent), Auto control (When vapor sensor is used: option), Step control 
Safety features Rotating motor overcurrent protection, Liquid expansion type independent overload protector, Earth leakage breaker, Jack overload protection, Heat-sensitive dry-heating protector, One-touch clamp section safety cover 
Bath jack mechanism Electric automatic jack (Automatic descent function during power failure: factory option N-4100J) 
Heater For temperature control 3.5kW 
Motor  Induction motor output 90W (Inverter control) 
Condenser Vertical triple spiral, Cooling surface 0.5m2 (Suction/cooling water threaded connection, S65 ball taper joint) 
Sample flask 20L round shaped flask (Flange diameter 100mm)  
Receiving flask 10L round shaped flask x 1pc with drain valve 10L round shaped flask x 2pcs with drain valve (3-way valve for atmosphere, vacuum, drain) 10L round shaped flask x 1pc with drain valve 
Vacuum seal Teflon® seal
Bath dimensions / capacity / material 430 ID x 240H (mm) / 34L / Stainless steel 
Connection port diameter Condenser (Cooling water nozzle 16mm OD / Cooling water nozzle 16mm OD)
Vacuum control valve (Connection nozzle 13 mm OD / Release valve nozzle 10mm OD) 
Ambient temperature range 5 to 35°C 
Outer dimensions (mm) 1060W x 570D x 1910H 1170W x 700D x 1910H  1060W x 570D x 1570H 
Weight Approx. 141kg Approx. 152kg Approx. 118kg 
Power input  17-18A, 3.9-4.3kVA, 230-240VAC, single phase, 50/60Hz
19-20A, 3.8-4.4kVA, 200- 220VAC, single phase, 50/60Hz

• Models with an automatic descent function in the event of a power failure (factory option) are indicated by a “J” at the end of the model number. (Note: Cat. Nos. also are different from the models without the function). 

Model  N-4100J N-4100WJ N-4100HJ
Cat. No.  281660 281680 281670
Bath jack mechanism Automatic descent function during power failure

◊ The ultimate vacuum is based on the use of an oil-sealed rotary vacuum pump.

◊ Evaporation capacity varies depending on conditions such as the degree of vacuum, bath temperature, and cooling water temperature.

◊ The temperature control range depends on the ambient temperature and evaporation rate.

◊ Power plug is not included.

 

• Data

♦ Evaporation capacity curve

 

• Ultimate vacuum

• Heating curve

 

• Options

Product name Outline Model  Cat. No.

Sample injection/solvent discharge unit

The injection of samples and the discharge of solvents can be automatically performed without removing any glass components. IDU-1000 259820
10L sample flask 223300

Diaphragm vacuum pump

• Diaphragm vacuum pump with large displacement.

• Oil-free design eliminates the risk of pump deterioration due to solvents.

• Compact and lightweight at 7.4 kg for easy handling.

N950 251170
Pump connection cord Use the connection cord to connect the power supply of the diaphragm vacuum pump N950 model to the main unit. N-SB 245370
Vapor sensor 223590

Polyurethane resin coating glassware (condenser, adapter, receiving flask) EYELACOAT® is also available.