Product line-up

Vacuum seals and Teflon^® seals

	Product name	QTY	Cat. No.
Vacuum seals	Standard seal supplied with the N-1110 series. It is also compatible with the N-1200 and N-1300 series.	2 pairs	142610
Teflon® seal	Standard all-Teflon® (PTFE) seal supplied with the N-1200 series. Features long service life and superior chemical resistance. Can also be used with the N-1110 and N-1300 series.	1 pc	244980
Teflon® seal	Long-lasting, chemically resistant all-Teflon® (PTFE) seal designed for the N-2110 series.	1 pc	248960

Vacuum hose, Cold insulation hose and One-touch connector

Vacuum hose

	Product name	Tube diameter	Length	Cat. No.
One-touch insulation hose set	A cooling hose that can be connected simply by plugging it into a dedicated nozzle. Because conventional band tightening is eliminated, there is no fluid leakage caused by loose band tightening.	10mm OD	2m	244940
			5m	244950
Insulation hose set	Prevents condensation during cooling water circulation and reduces cooling capacity loss.	9.0mm ID	2m	112700
			5m	174420
		12.0mm ID	2m	143330
			5m	174440
		15.0mm ID	2m	143340
			5m	174460

	Product name	Specification	QTY	Cat. No.
Nozzle set (white)	A suction nozzle to be attached to the condenser. It consists of a nozzle body, fixing screw, and nozzle gasket. Because this part comes into contact with vapor, please select and use either Viton® or Perfluor gasket, depending on the chemical resistance required for your solvent.	10mm OD	3 pairs	142690
Replacement nozzle gasket		Chloroprene	12 pcs	142691
Viton® gasket		Viton®	4 pcs	202770
Perfluor gasket		Perfluor	3 pcs	280290
Cooling water nozzle set (grey)	A cooling water nozzle to be attached to the condenser.	10mm OD	2 pairs	178900
One-touch connector	A connector dedicated to one-touch cooling hoses. Connections can be made simply by plugging the dedicated hose into the connector.	10mm OD	1 pc	244930
Gasket for one-touch connector		10mm OD	12 pcs	260960
One-touch hose nozzle		10mm OD	2 pcs	247210

Capillaries

Capillaries which consist of a cock and capillary tube for continuous injection. Available in four types: glass, Teflon® tube, and Teflon^® for anti-sticking.

EYELA Jack (model EJ)

Model	Size (top plate)	Vertical stroke range	Cat. No.
EJ-A	150 x 150mm	70 to 250mm	116120
EJ-B	200 x 200mm	90 to 320mm	116130

Bumping prevention device (safety cap) PAT.

• Simply attach it to the rotary joint. A simple bumping prevention device focusing on the principle of bumping.
• Made of Teflon^® and compatible with all solvents. For different diameters, please use a dedicated adapter.
• Dedicated to TS29 rotary joints.
• Cannot be used with thick-walled rotary joints.
• For more information on the bumping prevention device, click here.

	Product name	Applicable rotary joint ID	Outer dimensions OD	Cat. No.
C-1 (standard type)	Equipped with a valve at the tip of the cap, the valve closes before bumping occurs due to a pressure difference between the condenser side and the sample flask side, and opens once the pressure difference is equalized.	20.2±0.5mm	23mm OD x 35mm length	116010
C-2 (rocket type)	Directs vapor against the hemisphere to efficiently circulate the inside of the flask, simply preventing bumping. Suitable for substances with relatively weak bumping tendencies.	20.2±0.5mm	23mm x 24mm length	116020
C-3 (filter type)	Prevents bumping by smoothing out sudden pressure changes with a glass filter (G3). It is also effective in preventing powder scattering, such as when drying crystalline samples.	20.2±0.5mm	23mm x 27mm length	116030

Other option parts

	Product name	QTY	Cat. No.
Glass stopper	This capillary cock without an introduction tube is designed for continuous injection. It prevents the backflow of condensate.	1	116970
3-way cock	Using a 3-way cock allows the distillate in the receiving flask to be collected during operation.	1	116960